FM Metal Fasteners S.p.A.

FM Metal Fasteners Group S.p.A. is a leading Company in the distribution of standard and special fasteners on customer demand. Boasting a precious heritage of tradition and innovation, we are always willing to cover any customer needs. Strategic locations of our facilities allow us to cover with efficiency the entire European area. Our well-prepared employees offer constant, punctual and qualified consultancy and allow an extremely quick enquiry processing. Our commitment is to always provide our Italian and European Dealers with a complete range of certified products of good quality at extremely competitive prices. For further information please, visit our website: www.fmspa.com.

Via E.Villa, 3 - 42124 Reggio Emilia (RE),
Italy

Tel:

+39 0522271117

E-Mail

Web

Products

Blind fasteners (rivets, rivet nuts)

Rivet nuts

Closed end rivet nuts (DIN: 7337/ISO: 14589)Open end rivet nuts (DIN: 7337/ISO: 14589)

Rivets

Blind rivet countersunk head (DIN: 7337/ISO: 14589)Blind rivet dome head (DIN: 7337/ISO: 14589)Blind rivet large flange - 16mm (DIN: 7337/ISO: 14589)Break mandrel blind rivets (DIN: 7337/ISO: 14589)Grooved rivet (DIN: 7337/ISO: 14589)Rivet round head (DIN: 660/ISO: 1051B)

Bolts

Hexagon head bolts

Hexagon bolts with flange (DIN: 6921/ISO: EN 1665)Hexagon head bolts with hexagon nut for steel structures (DIN: 7990)Hexagon head bolts with shank - metric fine pitch thread (DIN: 960/ISO: 8765)Hexagon head bolts with shank - Product grade C (DIN: 601/ISO: 4016)Hexagon head bolts with shank (DIN: 931/ISO: 4014)Hexagon head screw with full metric fine pitch thread (DIN: 961/ISO: 8676)Hexagon head screws with full thread (DIN: 933/ISO: 4017)Hexagon head screws with partial threadHexagon head screws with thread up to the head - Product grade C (DIN: 558/ISO: 4018)

Other bolt types

Anchor boltsCarriage bolt (DIN: 603)Cup head nib bolts (DIN: 607)Eyebolts (DIN: 444)Hanger boltsHexagon fit bolt with long thread (DIN: 609)Hexagon head fit bolt with short thread (DIN: 610)Lifting eye bolts (DIN: 580)Roofing Bolt and Square Nut - Mushroom Head

Clamps and rings

Clamps & ClipsRetaining rings for bores (DIN: 472)Retaining rings for shafts (DIN: 471)

Construction fixings

Concrete screwsRoofing and solar installation fixingsSecurity fasteners for buildingsStainless steel fixings Structural steel fastenersThreaded rods and suspension fixingsWindow screws/frame anchorsWood/chipboard/decking screws

Fastener assemblies and combinations

Hexagon washer faced head tapping screw (DIN: 6928)High strength structural bolt and nut assembly (DIN: 6914/ISO: EN 14399-4)Structural assembly set (ISO: EN 15048)Structural assembly set with fit bolt (ISO: EN 15048)

Inserts

Threaded inserts

Locking devices and seals

Thread Locking

Nuts

Cap nuts

Hexagon cap nuts, low type (DIN: 917)Hexagon dome cap nuts, high type (DIN: 1587)

Hexagon castle nuts

Hexagon slotted and castle nuts (DIN: 935)Hexagon thin slotted and castle nut (DIN: 979)Hexagon thin slotted and castle nut (previous design) (DIN: 937)

Hexagon nuts with flange

Hexagon collar nuts with a height of 1.5 d (DIN: 6331)Hexagon nuts with flange (DIN: 6923/ISO: EN 1661)Prevailing torque type all-metal hexagon high nuts with non-metallic insert (DIN: 6926/ISO: EN 1663)Prevailing torque type all-metal hexagon nuts with flange (DIN: 6927/ISO: EN 1664)Prevailing torque type all-metal nuts with flange (DIN: 6927/ISO: EN 1667)Prevailing torque type hexagon nuts with flange with non-metallic insert (DIN: 6926/ISO: EN 1666)

Hexagon regular nuts

Hexagon nuts - Product grade C (DIN: 555/ISO: 4034)Hexagon nuts - Style 2 (ISO: 4033)Hexagon nuts with metric coarse pitch thread (DIN: 934/ISO: 4032)Hexagon nuts with metric fine pitch thread (DIN: 934/ISO: 8673)

Hexagon thin nuts

Hexagon thin nuts (chamfered) - with metric fine pitch thread (DIN: 936/ISO: 8675)Hexagon thin nuts (chamfered) (DIN: 439/ISO: 4035)Hexagon thin nuts (unchamfered) (DIN: 439/ISO: 4036)

Other nuts

Cage nutsEye nuts (DIN: 582)Forged turnbuckles (Open type) (DIN: 1480)Hexagon nut (DIN: 555/ISO: 4034)Hexagon nuts with a height of 1.5 d (DIN: 6330)Locknuts (DIN: 70852)Square nut (DIN: 557)Square thin nut (DIN: 562)Thick hexagon nuts (special purpose) (ISO: UNI 5587)Wheel nutsWing nuts, rounded wings (DIN: 315)

Prevailing torque type hexagon nuts

Prevailing torque type all-metal hexagon nuts (DIN: 980 & 6925/ISO: 7042)Prevailing torque type all-metal high nuts (DIN: 980/ISO: 10513)Prevailing torque type hexagon nuts with non-metallic insert, heavy type (DIN: 982 & 6924/ISO: 7040)Prevailing torque type hexagon nuts with non-metallic insert; low type; metric fine pitch thread (DIN: 985/ISO: 10511)Prevailing torque type hexagon regular nuts with non-metallic insert and metric fine pitch thread (DIN: 982/ISO: 10512)Prevailing torque type hexagon thin nuts with non-metallic insert (DIN: 985/ISO: 10511)

Weld nuts

Square weld nuts (DIN: 928)Square weld nuts (DIN: 929)

Other products

Allthread (DIN: 975)Cold forged fastenersHexagon couplers (DIN: 6334)Hexagon turnbuckles (closed type) (DIN: 1479)Hexagon turnbuckles (open type) (ISO: BS: 4429)Hot Dip Galvanized productsHot forged fasteners and partsRound turnbuckles (open type) (DIN: 1480)Screw plugsSpecial/to drawing fastenersStainless steel fasteners Tie barsTie rods

Pins

Other pins

Split pins (DIN: 94/ISO: 1234)

Spiral pins

Spring pins/roll pins - slotted, heavy-duty (DIN: 1481/ISO: 8752)

Taper and parallel pins

Parallel pins with internal thread, hardened (DIN: 7979/ISO: 8735)Parallel pins with internal thread, unhardened (DIN: 7979/ISO: 8733)Parallel pins, hardened (DIN: 6325/ISO: 8734)Parallel pins, unhardened (DIN: 7/ISO: 2338)Taper pins with internal thread, unhardened (DIN: 7978/ISO: 8736)Taper pins, unhardened (DIN: 1/ISO: EN 22339)

Screws

Other screw types

Plastic screwsThread rolling screws (DIN: 7500)Wing screws, rounded wings (DIN: 316)

Small slotted or cross recessed screws

Cross recessed countersunk flat head screw (DIN: 965/ISO: 7046)Cross recessed raised countersunk head screw (DIN: 966/ISO: 7047)Hexalobular cheese head (DIN: 7985/ISO: 7045)Slotted cheese head screws (DIN: 84/ISO: 1207)Slotted countersunk head screws (DIN: 963/ISO: 2009)Slotted raised countersunk head screws (DIN: 964/ISO: 2010)

Wood screws

Hexagon head woods screws (DIN: 571)

Self drilling/tapping screws

Hexalobular socket countersunk head tapping screw (DIN: 7982/ISO: 14586 C)Hexalobular socket pan head tapping screw (DIN: 7981 C/ISO: 14585 C)Self drilling screw (DIN: 7504 N/ISO: 15481)Self drilling screw with hexagonal head (DIN: 7504 K/ISO: 15480)

Self-tapping/thread forming screws

Tapping screws

Cross recessed countersunk head tapping screw (DIN: 7982/ISO: 7050)
Cross recessed pan head tapping screw (DIN: 7981/ISO: 7049)Cross recessed raised countersunk head tapping screw (DIN: 7983/ISO: 7051)Hexagon head tapping screw (DIN: 7976/ISO: 1379)

Thread forming screws

Self-drilling screw (DIN: 7504)

Socket head products

Hexagon and hexalobular socket set screws

Hexagon socket set screws with cone point (DIN: 914/ISO: 4027)Hexagon socket set screws with cup point (DIN: 916/ISO: 4029)Hexagon socket set screws with dog point (DIN: 915/ISO: 4028)Hexagon socket set screws with flat point (DIN: 913/ISO: 4026)

Small hexagon or hexalobular screws

Heavy duty hexagon head screw plugs (DIN: 910)Hexagon socket button head screws (ISO: 7380)Hexagon socket button head screws with collar (ISO: 7380)Hexagon socket countersunk head screws (DIN: 7991/ISO: 10642)Hexagon socket head cap screw fully threaded (DIN: 7984)Hexagon socket head cap screws with centre, with low head (DIN: 6912)Hexagon socket head cap screws with low head (DIN: 7984)Hexagon socket head shoulder screws (ISO: 7379)Hexagon socket pipe plugs (DIN: 906)Hexagon socket screw plugs (DIN: 908)Hexalobular socket cheese head screws, low head (ISO: 14580)Hexalobular socket countersunk flat head screws (ISO: 14581)Hexalobular socket pan head screws (ISO: 14583)Hexalobular socket raised countersunk head screws (ISO: 14584)

Springs

Disc springs (DIN: 2093)

Studs and threaded rod

Studs

Studs - metal end ˜ 1 d (DIN: 938)Studs - metal end ˜ 1.25 d (DIN: 939)

Threaded rod

Stud bolts metric thread (DIN: 976-1)Threaded rod (DIN: DIN 976-1)

Surface and heat treatment coatings and processes

Surface and heat treatment coatings and processes

Black coatingsBurnishingCarbonitridingCarburisingCorrosion protection coatingsCr(VI) free finishesZincflake coatings

Washers and pressed parts

Spring washers, conical spring washers and serrated lock washers

Conical spring washers for bolted connections (DIN: 6796)Curved spring lock washers (DIN: 128)Curved spring washer (DIN: 137)External tooth lock washer (DIN: 6797)Reinforced contact spring lock washer (DIN: 43699)Retaining washer for shafts (DIN: 6799)Serrated lock washers (DIN: 6798)Single coil spring lock washers for cheese head screws (DIN: 7980)Spring lock washers, barbed or plain (DIN: 127)Toothed lock washers (DIN: 6797)Wave spring washer (DIN: 137)

Washers

High strength structural washer (DIN: 6916/ISO: 7416)Lock washer MB (DIN: 5406)Plain washer - 100 HV (DIN: 126/ISO: 7091)Plain washer - from 300 HV - Product grade A (DIN: 125 Part 2/ISO: 7089 and 7090)Plain washer - up to 250 HV - Product grade A (DIN: 125 Part 1/ISO: 7089 and 7090)Plain washer- Small series - Product grade A (DIN: 433/ISO: 7092)Plain washers - Large series - Product grade A (DIN: 9021/ISO: 7093 - Part 1)Shim rings and supporting rings (DIN: 988)Square taper washer - especially for timber constructions (DIN: 436)Square taper washer 14% for I-sections (DIN: 435)Square taper washer 8% for U-sections (DIN: 434)Washers - especially for timber constructions (DIN: 440)Washers for steel structures - Product grade A (DIN: 7989-2)Washers for steel structures - Product grade C (DIN: 7989-1)
YouTube

Allow YouTube Content?

This page contains content provided by Google YouTube, who may use cookies for the purposes of tracking. Before loading such content you may wish to review Google's Cookie Policy and Privacy Policy before accepting. To view this content click 'Accept and Continue'.

Verulam Media is not responsible for the content of external sites

An error has occurred. This application may no longer respond until reloaded. Reload 🗙